The Wayne A. and Marilyn Wells 1950 Farmall Model M
Brian Wayne Wells
This article remains under construction. Periodically, new blocks of text will appear in the article and/or current blocks of text will be corrected.
The International Harvester Company introduced the Farmall Model M as a full-three plow tractor in the autumn of 1939.
In early 1950, Wayne Alwin Wells traded the 1942 Farmall Model had been owned his father George Cleveland Wells, in to the Seese and Oksenan dealership in LeRoy, Minnesota, on the purchase of a Farmall Model M. Pursuant to the purchase contract of this tractor, the Farmall M bearing the Serial No. 2518137 was delivered to the Wayne Wells farm in eastern LeRoy Township, Mower County, Minnesota on March 1, 1950. Wayne needed to grind up some feed for the baby pigs which had just been weaned. So he immediately belted the new tractor up to the Case hammer mill which was bolted to the floor of the granary on the farm.
He then went to the house and got his wife, Marilyn (Hanks) Wells and their one-year old son Brian Wayne Wells (the current author of this article). He also picked up the little Kodak Brownie camera. He then took a new picture of his son on the operator’s seat of the new tractor with his wife Marilyn holding young Brian securely in the seat.
The Wells family held an auction of all their farm equipment in preparation to moving from the farm in 1964. At the auction Serial No. 218137 was purchased by Dean Shirbourne.
In the years since 1964, Dean Shirbourne continued farming. Most of the machinery Dean used on his farm was International Harvester farm equipment. He had other more modern Farmall tractors than the 1950 Farmall M he had purchased at the Wayne Wells farm auction. Accordingly, he placed the 1950 Farmall M bearing the serial number 2518137 under an International Harvester two-row mounted Model 2MH corn picker. This picker remained on the 1950 Farmall M until Dean retired from farming in 1993. Every fall the tractor and mounted corn picker was used to “open” the corn fields on the Shirbourne farm and a couple of Dean’s neighbors. (John Grass Jr., one particular neighbor of Dean Shirbourne remembers using the 1950 Farmall M on his farm.)
Once the mounted picker on No. 218137 had picked the corn in the “end rows” across both ends of the corn field and once the body of the corn field had been “opened” and divided into “lands,” Dean Shirbourne brought in his two-row New Idea Model 6A pull-type corn picker to pick the remainder of the corn in his fields. Recognizing that mounted pickers are not the best pickers for “husking” (removing the husks from the ears of ripe corn), Dean Shirbourne and his neighbors preferred to use pull-type corn pickers to do the main job of picking their corn fields. Pull-type corn pickers were respected for their large and very efficient husking beds. Pull-type pickers had the best chance of getting the harvested corn down to a level of 4% or less “foreign material” (husks) in the ear corn crop.
Husking the corn down to a level of 4% foreign material (husks) was the ideal that farmers strove for in order to store the ear corn in normal corn crib over the winter. Only a level of 4% or less foreign material in the ear corn would allow the cold dry air of winter to flow relatively unobstructed through the ear corn stored in the corn crib and dry the annual crop of corn sufficiently over the winter from the period of time from the harvest in October or November until February or March, when the ear corn would normally be dry enough to be shelled and stored in a granary. To store the ear corn in a corn crib at a level of more than 4% foreign material would invite blockage of the flow of air through the crib and invite mold forming on the ear corn. and risk without
Thus, once the corn fields were opened and divided into “lands,” Dean Shirbourne and his neighbors could conveniently use their pull-type pickers on the main body of the corn crop. Thus each year, the 1950 Farmall M was used only for the short period of time each fall that it took to “open” the corn fields on the Shirbourne farm and on the farms of a few of his neighbors. During the remainder of the year, the 1950 Farmall M bearing the Serial No. 218137 was stored away with its mounted corn picker in the machine shed on the Shirbourne farm.
Thus, from 1964 until Dean Shirbourne retired from farming in 1993, No. 218137 was used only for a couple of weeks in the autumn of each year to open the corn fields in preparation of the harvest. Upon his retirement from farming in the 1990s, Dean Shirbourne gave the 1950 Farmall M, bearing the Serial No. 218137, to his nephew–Mark Mossyge–who beautifully restored the tractor.